Various Atari 2600 carts & other Atari l00t from Retro Gathering VCE 2017

February 15, 2017 by stopXwhispering

This is part 1 of my Retro Gathering l00t :) I will go through everything bit by bit once I’m done sorting and cleaning stuff ^_^ As you might have seen on my Instagram it was quite a large haul XD So let’s start off with all my Atari related pickups! I found quite a few Atari 2600 games thanks to my friend nesfrk who pointed out to me the big box of Atari carts that was hiding under a table that I had missed! I ended up buying 22 Atari 2600 games in total, and many of them were in different shapes and sizes. I haven’t really read up a lot about these, but it started fascinating me after I found out about the Atari V-carts that I recently bought from a friend, and now I kind of wanna know what the rest of the weird looks of the Atari 2600 carts are about XD

End labels on Atari 2600 games

Some of them are a bit more obvious, they were released by a certain company that just made their own style of cartridges and labels, such as Parker Brothers or ActiVision. Parker Brothers’ Atari 2600 carts have a really cool shape in my opinion, and the labels are silver. I don’t know if there were other variants, but all the ones I own which read Parker Brothers on the back all have silver labels. And the ActiVision ones are a bit more dull, just black and white but with the ActiVision logo printed in the plastic on the back, just like the Parker Brothers logo. ActiVision does have other labels as well, more colourful, I own a few of those as well, but I think these black and white ones might be region specific.

Spider-Man and Sky Skipper – Atari 2600

Black and white ActiVision games on Atari 2600

These are the common Atari carts that I’m used to seeing. Either with a silver label, a black label with a colourful name on the side or the black with silver frame labels. Also there’s the full color ones, that have one bright background colour and same colour on the end label.

Millipede, Pac-man, Slot Racers and Freeway – Atari 2600

Miniature Golf, Indy 500 and Sky Diver – Atari 2600

I found some odd carts with 2 games in 1 called 2 Pak Special. I’ve never seen these before. The seller told me they were Australian (if I’m not mistaken). Kind of ugly, but still charming in a way XD

2 Pak special – Atari 2600

I also got Hero by Imagineering, from 1990 (!!), and I just read that they didn’t discontinue the Atari 2600 until 1992! 25 years later!! this blew my mind XD Then there was a Telegames game called Armor Ambush with a silver label and finally three unidentifiable games. Two of them have the same cartridge case, it has S.S imprinted on the back, but other than that it only reads the game name and no publisher, so I’m thinking they might be bootlegs? They’re German at least I can tell from the names XD Funny names! Super-Cowboy beim Rodeo and Vom Himmel durch die Hölle (From heaven to hell). The last one called Lilly Adventure has a similar cartridge case but it’s a little bit shorter and doesn’t have anything printed on the plastic..

Hero and Armor Ambush – Atari 2600

Super-Cowboy beim Rodeo, Vom Himmel durch die Hölle and Lilly Adventure – Atari 2600

So many variations right! :D That’s probably far from all of them as well XD I also found two joysticks for the Atari 2600. The Driving paddle controller :) It was apparently needed for the Indy 500 game, so I ran and picked them up from the place at the convention where I had seen them earlier that day, by Butik Mackapär ^_^

Atari 2600 driving controllers

I also picked up a few Atari 400 games. I bought an Atari 400 not too long ago, haven’t got it up and running yet, but I will make another attempt soon. Meanwhile I found these game cartridges for it :)

Atari 400 – Star Raiders, Galaxian and Pac-Man

Atari 400 – Donkey Kong Junior, Jumpman Junior and Frogger

And I also got one Atari ST game ^_^ It was cheap, in nice condition and I liked the cover art :)

Prison – Atari ST

More posts are coming with the rest of the loot from Retro Gathering soon ^_^

Review of the 1 UP Card

May 6, 2015 by stopXwhispering

Adam over at 1 UP Card was kind enough to send me a sample of his product!

The 1 UP Card is supposed to be an alternative to Q-tips for cleaning retro video game cartridges. I have actually grown quite attached to my Q-tips, I’ve found a brand at my local super market (the more expensive brand) that works great! The stick is stiff and doesn’t bend too easily and they do not generate any fuzz, the cotton merely stays on the Q-tip ^__^ I am however open to try new things! :D So here’s what the 1 UP Kit looks like:

There’s a fluid bottle with 1.25oz of 99% isopropyl alcohol. The dispenser is really neat and easy to use, and it doesn’t create as much of a mess as my giant bottle of alcohol that I usually use. However, I’m afraid it won’t last as long ;D

You also get a 1 UP Card with a fluid side and a dry side for rubbing the connections on the cartridges. On the pic below I’ve wet the fluid side ^_^

So I’ve tried this out! First of all I tried an NES game. The pad and the card fit perfectly. Rubbing was smooth and fast. You got a better grip than with a q-tip and could therefore rub faster. Another benefit is that you managed to get the edges of the pins, which is usually a bit of a drag with a q-tip since it easily falls between the gap at the end of the pins before the plastic.

After this I tried out the Game Boy cartrdige! Here the 1 up card did not fit, I managed to force a corner of it in there, but the 1 up card is still wider than the cartridge. So here it’s still more effective with 1-tips.

Next I tried a Famicom cartridge! This worked perfectly! I think it’s got kind of the same dimensions as an NES cartridge in the space between the pin connector and the plastic.

Then I went on to some heavy duty stuff! I just got 5 really really dirty Neo Geo MVS cartridges of Metal Slug 1 – X in the mail today! The 1 up card was smaller than most of the gaps, but on one particular cartridge the last pin towards the plastic had a really thin gap where I couldn’t reach with the card. Apart from that it went well. Here it was much faster working with the 1 up card than with q-tips. I usually spend around 20 q-tips on one Neo Geo cart…

After these games (1 NES, 1 Famicom and 5 REALLY dirty MVS carts) the card looked like this:

What bugs me with this apart from working with q-tips is that you can’t really tell when the game is thoroughly clean. When I use q-tips I pick a new one until they don’t turn dirty anymore, then I know that the cartridge is as clean as can be. Sometimes it’s enough with 2 q-tips, sometimes I have to work through 20! Here, the 1 up card looks dirty after a while and you won’t know if the new cartridge you’re cleaning is clean enough or not…

After this I picked a new 1 up card because I felt the other one was dirty. On Adam’s site he states that it’s ok, because the dirt goes into the pad and stays in the bottom.. but I still felt like it was dirty, and didn’t wanna rub that extreme MVS dirt onto the other less dirty carts ;D So I went on with a new 1 up card on a Sega Mega Drive (Genesis) cartridge! It worked, but you had to force it down a bit for it to fit.

After this I tried Sega Master System. In the front there was lots of space for the 1 up card to fit, but in the back I had to force it down even more than on the Mega Drive (Genesis) cartridge. It worked though, with some force ;D

Next up was Super Nintendo! Also very tight to fit the 1 up card. Like the back of the Master System. Had to force it in there, but once in it worked.

Then I tried a Nintendo 64 cartridge. A little bit better than SNES, but still tight.

And finally an Atari 2600 cartridge! :D These are difficult as is, since you have to push down the plastic to reveal the pin connectors, but I would say that it’s easier with the 1 up card since you can keep pressing the card down while cleaning to keep the pins exposed. When using q-tips you will have to hold it down simultaneously with your other hand.

After this the second card I had used looked like the picture below (middle card). These latest games I cleaned though were from the collection, however not used in a while, so they’ve been thoroughly cleaned once before, but of course collect more dirt by just hanging around.

After a final super-rub of the first NES cartridge I tried to rub it with a regular q-tip and the alcohol I usually use just to see how clean it was, and below you can see the result. Barely any dirt left ^_^

Now for the final test! 1 up card also states that it removes permanent marker, stickers, and grime from your games. I brought forth NES cartridges with stickers, gooey residue and permanent marker scribbles :D

First up is the sticker on Caveman games! After some rubbing and scraping with my nails I got it off. I do the same with q-tips which works just as well. The benefit with q-tips is that the rubbing surface is smaller, which makes it easier to avoid the actual label sticker on the cartridge (which you want to keep on there ;D). Apart from that it worked fine.

Then onto the old unidentified sticker residue on the back of NES cartridge. This one did not come off! I rubbed for over 5 minutes and scraped it, and nothing happened. If anything, it got a little bit cleaner ;D haha

Then the permanent markings ^_^ These came half way off, they revealed what was written underneath with an apparently more permanent marker! haha ^^ The sticker residue in the bottom came off nicely though. The pad was completely black after this procedure and while rubbing it on the sticker the surface got black smeared all over it.. so I will not re-use this 1 up card for any pin cleaning..

In my opinion the 1 up card is a good product! It’s faster than q-tips and less messy. It’s definitely a more expensive solutions though. I’ve used maybe 1/10th of the fluid only tonight, compared to my big bottle which lasts FOREVER! ;D The 1 up card kit costs $12.95 with one bottle and 1 card, and $15.95 with 3 cards and a bottle. Refill cards (set of three) costs $9.95. So it’s still not super expensive, for a small collector this is definitely a great and simple solution to cleaning your games! For me though, who get games in the mail almost on a daily basis, it would not be cost effective (especially not with shipping to Sweden) ;D

Something that was nice is that I didn’t have to re-wet the fluid part of the card, it stayed moist for the entire test! This saves time compared to dipping q-tips every 30 seconds…

I really liked the packaging of the product and it works with almost all retro game cartridges, you can tell that it’s based on the NES though, which it fit perfectly in. Unfortunately not with the Game Boy games though, but these are so fast and easily cleaned with a q-tip anyway so it doesn’t really matter.

I will save and continue using my kit for my Neo Geo games! Here the kit was a major time saver and q-tip saver ;D haha ^_^

If you wanna know more about the 1 UP CARD you can check it out here >>

The Vectrex

June 16, 2014 by stopXwhispering

The Vectrex has always been a mystery to me, I haven’t really read up on it or anything, but it has crossed my path of hunting down retro games all over the web more than ones. I’ve always been intrigued and thought many times about whether I should get it on eBay or not. It was always pretty expensive, and I had no clue if I would be able to play it or not (because of power outlets and such). I didn’t even know what to expect from it, but it sure looked cool! :D Recently though a friend found an ad in Sweden from a guy who was selling one! I got so excited I rushed to buy it instantly! I might sound like a total n00b, but I actually prefer not knowing about games and even systems until I get them in my possession, that way I can experience them the same was as I would if they were new, the only thing I basically research when game shopping are the prices so I don’t overpay ^^

This one was originally sold in Sweden (I didn’t even know it was released here!!) and it had a bunch of games and extras :D

The first problem I encountered was how to turn the Vectrex off?! It started immediately when I plugged in the power cord.. but I didn’t wanna change cartridge or move it until I figured out how to turn it off first! I had to google for about 40 minutes before I found out! I discovered an old original users manual for the Vectrex as a PDF that someone had scanned in (THANK YOU!!) and finally read my way to understanding that the volume lever IS ALSO the on/off button. At first I didn’t believe it, because I kept turning it to max and the minimum but nothing happened, but like with any old machinery you have to be patient! After turning the volume knob all the way to the left (turning the volume down) until you hear a click, just leave it there for a little while, the system will power down after all the juice has run out of it! Haha, this was trippy >.<

It has a cartridge slot on the right side of the screen, and that’s where you insert the games. It comes with one built in game as well called MineStorm :D

The system has two controller ports, I got two controllers with the system ^_^ One controller can be folded into the front of the system so it’s not lying around :D The controller is kind of awkward when used though. It’s big and bulky, not really comfortable to hold so the best way to play is to put it in front of you on a flat surface in my opinion.

On the above picture you can see the controller folded into the bottom of the system, it’s got the logo on the back of it :)

I also got 19 games with it, they were:

Armor Attack	Art Master	Bedlam	Berzerk
Blitz!	Clean Sweep	Cosmic Chasm	Flipper Pinball
Fortress of Narzod	Hyper Chase!	Rip Off	Scramble
Soccer Football!	Solar Quest	Space Wars	Spike
Star Hawk!	Star Ship	WebWarp

When I added them to my collection on retrocollect.com it said I had all the games for it, but I haven’t researched it any further. Perhaps there are more games that came out in North America? Then again, I’m not sure whether this system is region free or not…

Every game that I got had it’s overlay! Overlays are a colorful transparent plastic cards that you put in front of the screen to give the illusion that you’re playing in color ;D Since every game displayed on the Vectrex is white on black it sure provides some variation :) My favorite overlays are Bedlam and Scramble:

Here’s some other really pretty ones:

Another amazing accessory I got for the system was the Light Pen! This is used together with the Art Master program. You can Sketch, Connect or Animate ^^ It works amazingly well! :D

If anyone knows if there are more games released for it that I don’t know of, please enlighten me :D

Cartridge Comparison: NES vs Famicom

July 28, 2013 by stopXwhispering

I don’t usually intend to buy games for various platforms if I already have them for one, unless I know that there are major differences in the game. However, sometimes it happens that I buy a game I already have since the name and label are completely different, making me think it’s a completely different game..

Here are some examples where I haven’t realized it was the same game until I actually played and recognized it! :)

Xexyz VS Kame no Ongaeshi Urashima Densetsu
Xexyz is the american NES release, and in Japan it’s called Kame no Ongaeshi Urashima Densetsu.. I did not see that one coming ^_^ It’s great platforming fun though!

Rockin’ Kats VS Nyankies
Rockin’ Kats is the PAL NES release, and when I got Nyankies (which it is called in Japan) I first thought it was some sort of sports game, since it made me think of the New York Yankees (I think that’s a team in some sport.. not my field of expertise though) ;D Man was I happy to realize it wasn’t a sports game but a fun platformer, a bit less exciting that I already had it though … >.<

The Krion Conquest VS Magical Kids Doropie
Here I actually got the Famicom game first. I had never seen it before and got really excited when I discovered a copy on eBay.. I paid looots of moneys for it >_< It was fun though! Kind of like a female Mega Man, but harder. Just like a month later I found The Krion Conquest, never heard of that one either, and bought it quite cheap at the Swedish Retro Gaming Exhibition.. when I popped it in I realized it was the same game that I had just spent a fortune on >-<

Dino Riki VS Shinjinrui
Here’s another example of the same game bearing a totally different name. In this case however the cover has similar artwork, a boy raging on a dinosaur haha ^_^

Air Fortress VS Air Fortress
Of course sometimes I do buy games knowing I already own another version of it.. just because it’s a good game at the right price, or perhaps because I’m curious to see if there are any differences in game play ^_^ Like Air Fortress, I enjoy it and didn’t mind owning it on the Famicom as well.

Cleaning your NES cartridges = no more glitchy gaming!

February 9, 2012 by stopXwhispering

This week I’ve been busy learning how to thoroughly clean my old NES games, and after learning and experimenting I’ve been busy thoroughly cleaning all my NES games.. I’ve only gone through one out of the 7 boxes so far >_<

Here’s some advice for those of you who still are in possession of your old Nintendo Entertainment System and wish to re-visit you old games without having to huff ‘n’puff and jiggle your way to being able to play!

First of all you have to purchase a special NES cartridge screw-thingy, these can be bought online and really cheap. I got mine from a Swedish site called nesconnector for only 69 SEK (approximately 10 USD). This is needed to open the special screws on the back of your cartridge.

Open up the back lid of the cartridge, and lift up the circuit board carefully, avoid touching the surfaces and hold it steadily by gripping the sides.

Here is where it got tricky for me, I watched a video on youtube where they used some polish cream by an american brand to clean the connectors, but I couldn’t translate that into a corresponding Swedish product. However, after talking to three different stores in my hometown, the jewelry store finally suggested a polishing cloth since it’s a dry way of polishing without getting water on the circuit board. The polishing cloth is impregnated with some kind of gold polish, but nothing that hurts the connectors. Now rub both sides of the golden connectors on the bottom of the circuit board (try avoiding touching other things on it) and rub until there’s no more black coming off on the cloth.

After this you insert the circuit board in the same place you removed it from, and close of the cartridge and screw it back together. Easy peasy! =D I’ve even gotten a few games to work that previously didn’t! ^_^